產品詳情
簡單介紹：
E14燈頭S1通規
標準依據 : IEC60061-3|GB/T1483.1
E14燈頭S1通規 (Go gauge for dimension S1 of E14 caps) 7006-27G-1
詳情介紹：
E14燈頭S1通規
7006-27G-1
7006-27G-1
Go gauge for dimension S1 of E14 caps 7006-27G-1
目的：
檢驗成品燈上E14燈頭尺寸S1的*大值和*小值。
PURPOSE:
To check the deminsion S1 minimum and S1 maxiimum of E14 caps on finished lamps.
檢驗：
當成品燈的燈頭完全插入量規時，柱塞的W面應與X面共面或凸出X面，但不應凸出Y面。
TESTING:
When the cap on a finished lamp has been pushed into the gauge as far as it will go, the plunger surface W shall be co-planar with or project byond surface X but it shall not project beyond surface Y.
產品留言
